4-5 Tons Loading Capacity Truck Driving Rear Axle With Oil Brake
Truck Transaxle Parameters
Structure | Full floating |
Loading Bearing | 32209 and 32210 tapered bearing |
Brake | Oil brake |
Length of rear axle | 1215mm (From hub to hub) |
Diff ratio | 6/41 |
Material | 93*6(GB/T8162-1999 seamless steel tube) |
Body Material | Ductile Iron |
Gear Material | 20CrMnTi |
Gear Modulus | 3.5mm-5mm |
Rim lock bolt | 6-M14*66 |
Speed | 1 speed |
PCD | 6*160 |
CB | 115mm |
Offset | 24mm |
Load capacity | 4-5T |
Wheel hub diameter | 250mm |
Net weight | 101kg |
Fit engine | from 50cc--600cc |
Application | Tricycle/rickshaw/small truck |
Brand | Zhuiye |
Lubrication Oil | GL-5 85w/90 gear oil, winter GL-5 80w/90 gear oil |
Truck Transaxle Introduction
Full-floating Rear Axle vs Semi-floating Rear Axle |
Type | Full-floating Rear Axle | Semi-floating Rear Axle |
Weight Burden | A full-floating axle carries the vehicle's weight on the axle
casing, not the halfshafts; | A semi-floating design carries the weight of the vehicle on the
axle shaft itself |
Loading Capacity | The full-floating design is typically used in most 3/4- and 1-ton
light trucks, medium duty trucks and heavy-duty trucks, as well as
most agricultural applications, such as large tractors and
self-propelled agricultural machinery. | The semi-floating axle setup is commonly used on half-ton and
lighter 4x4 trucks in the rear. is found under most 1/2-ton and
lighter trucks and SUVs and rear-wheel-drive passenger cars,
usually being smaller or less expensive models. |
Bearing Number | the full-floating assembly has bearings in both wheel hubs. | The semi-floating axle features only one bearing, while |
Wheel Comes Off or Not | No | Yes |
Truck Transaxle More Pictures
Truck Transaxle Drawing
Truck Transaxle Installation
Truck Transaxle Shipping&Packing
Truck transaxle can be packed by felt, pallet, felt+pallet,
felt+wooden box or any other packing as per your requirements. Truck transaxle usually chooses containerized sea shipping in quantity delivery or
air delivery in sample orders.
FAQ
1. Are you manufacturer?
Yes. We are one of leading manufacturers in rear axle
design&development.
2. Do you have stock products to sell?
Yes, a few. And we also offer OEM&ODM service. Please send us
your drawing.
3. What information needed to get truck transaxle quotation?
a). Truck max loading.
b). Pictures of your transaxle from different views.
c). Packing&Shipping requirements.
d). Quantity needed.
4. Do you inspect the finished products?
Yes. Each step of production will be carried out inspection by QC
department until finishing.
